Handling common problems with truck cranes

- Dec 22, 2018-

Drivers and drivers are often involved in driving, especially when driving long distances, such as oil pipe rupture, joint oil leakage, fuel tank damage, fuel pipe breakage, etc., then what should I do? Let's think about it together:

Tubing rupture

       When the tubing is broken, wipe the cracked area, apply soap, wrap it around the tubing with a cloth or tape, and tie it with wire, then apply a layer of soap.


2. Oil pipe joint oil leakage

       The cotton yarn can be wrapped around the lower edge of the horn, and the tubing nut and the oil pipe joint can be tightened; the bubble gum or maltose can be chewed into a paste and applied to the mouth of the tubing nut to be sealed after being dried.


3. Tank damage

       When the motor vehicle is in use, it is found that the oil tank leaks oil. The oil spill can be wiped clean, and it is temporarily blocked with soap or bubble gum. It is better with epoxy resin adhesive.


4. Tubing break

       The car should be equipped with a rubber plastic tube similar in diameter to the tubing. If the socket is not tight enough, it can be tightly sealed with iron wire at both ends of the hose to prevent oil leakage.